SBL-NET-01020: Internal: unknown hostname



Applies to:


Siebel System Software - Version: 7.8.2.5 [19227] and later   [Release: V7 and later ]
z*OBSOLETE: Microsoft Windows 2000

Product Release: V7 (Enterprise)

Version: 7.8.2.5 [19227]

Database: Oracle 9.2.0.8

Application Server OS: Microsoft Windows 2000 Server SP 4

Database Server OS: Microsoft Windows 2003 Server SP2



This document was previously published as Siebel SR 38-3358339279.



Symptoms


Hi,

During the upgrade we have installed our web servers on a new machines.
After moving external web server to DMZ zone we cannot log to echannel ,
eservice or wireless application.

The server you are trying to access is either busy or experiencing
difficulties. Please close the Web browser, open a new browser window,
and try logging in again.[21:02:58]

The web server log shows:

GenericLog    GenericError    1    0    2007-05-23
22:23:02    (smconn.cpp (271) err=1801020 sys=1300230) SBL-NET-01020:
Internal: unknown hostname

GenericLog    GenericError    1    0    2007-05-23
22:23:04    (smconn.cpp (271) err=1801020 sys=1300230) SBL-NET-01020:
Internal: unknown hostname

GenericLog    GenericError    1    0    2007-05-23
22:23:07    (smconn.cpp (271) err=1801020 sys=1300230) SBL-NET-01020:
Internal: unknown hostname

GenericLog    GenericError    1    0    2007-05-23
22:23:09    (smconn.cpp (271) err=1801020 sys=1300230) SBL-NET-01020:
Internal: unknown hostname

GenericLog    GenericError    1    0    2007-05-23
22:23:11    (smconn.cpp (271) err=1801020 sys=1300230) SBL-NET-01020:
Internal: unknown hostname

GenericLog    GenericError    1    0    2007-05-23
22:23:11    (ssmsismgr.cpp (635) err=5600003 sys=0) SBL-SSM-00003: Error
opening SISNAPI connection.



.....cont


Cause


Configuration/ Setup


Solution




ObjMgrSessionLog    Error    1    0    2007-05-23 22:23:11    Login failed for Login name : SiebelAnontst

ProcessPluginState    ProcessPluginStateError    1    0    2007-05-23
22:23:11     3908: [SWSE] Open Session failed (0x56bf) after     11.2381
seconds.

......

ProcessPluginRequest    ProcessPluginRequestError    1    0    2007-05-23
22:23:56     3548: [SWSE] Failed to obtain a session ID. Login failed
attempting to connect to %1

ProcessPluginRequest    ProcessPluginRequestError    1    0    2007-05-23
22:23:56     3548: [SWSE] Set Error Response (Session: Error: 00022207
Message: Login failed attempting to connect to
siebel.TCPIP.None.None://xxxxxxxx:2321/sieb78tst/WirelessServiceObjMgr_enu)





We have 2 load balanced application servers running call center OM that
are accessed via internal web server and one external web server that
connects to echannel, eservice and Siebel wireless using the external
web server (xxxxxxxx) .  

Before moving the external web server to the dmz we could successfully
test the access to those 3 applications using internal network.

We have opened port 2320 and 3 Static ports for each application (specified in the OMs configuration).

The network configuration seems to be fine.

The xxxxxxxx server referenced in the error log is our apps server

Please could you help us with this problem.

Please note attached files.



Comment:



According to the description:



The client had moved the web server to a DMZ and since that moment they
haven’t been able to access eChannel , eService and Wireless
applications.

They have opened port 2320 and 3 Static ports for each application and they were using a load balancing solution.



Solution:

   

    When a load balancing solution is used the web server must be able
to access the SCBroker port on each Siebel Server. After the
ScBroker(2321) port was opened they have been able to access the
applications.



Thank You,






Applies to:


Siebel System Software - Version: 7.5.2.7 SIA [15058] and later   [Release: V7 and later ]
Oracle Solaris on SPARC (64-bit)

Product Release: V7 (Enterprise)

Version: 7.5.2.7 [15058] Com/Med

Database: Oracle 8.1.7

Application Server OS: Sun Solaris 8

Database Server OS: Sun Solaris 8



This document was previously published as Siebel SR 38-1013977611.



Symptoms


SBL-SRB-00040, SBL-NET-01020We are installing our production environment, with many Siebel Servers on solaris
machine(s)
Some errors appear in the Gateway and SRBroker logs. See
attached.
Symptoms:
- When connecting via Dedicated Web Client it is not possible to view
the Servers in the Server Admin screens- error message is "No connections found to any active
servers".
- When connecting via command line srvrmgr from one of the Siebel Server boxes I can
see all Servers up, running and all Components healthy.
- When connecting via Web Client (this
is possible via the PRMManager OM) I get the strangest view: I can only see two Siebel Servers:
the SRVREAI1 and the one my connection was picked up by. The other ones are listed but all fields
(Status, etc.) read blank.
-
- When doing all the steps above against Dportal (another
environment) everything looks fine. Also, the two errors do not appear in the Dportal
environment.
Please check with our TAM Emidio Cignarella
Regards






Cause


Configuration/ Setup


Solution



Message 1


The Server Request Broker (SRBroker) log showed the error message:



GenericLog      GenericError    1       2003-05-23
14:35:28     (srbthrd.cpp 44(2431) err=1801020 sys=0) NET-01020:
Internal: unknown hostname

GenericLog      GenericError    1       2003-05-23
14:35:28     (srbthrd.cpp 44(2431) err=5700040 sys=1) SRB-00040: can't
open asynchronous SISNAPI connection



Resolution:

The /etc/hosts file of siebel Server(s) did not report the host name(s) related to ip addresses.

Adding the host names to the /etc/hosts resolved the reported behavior.





Siebel Technical Support



Keywords: name resolution, SRBroker, log file, hostname, host, unix, solaris










ymptoms



When load balancing is implemented, the following error is seen in the browser:


"The server you are trying to access is either busy or experiencing
difficulties. Please close the Web browser, open a new browser window,
and try logging in again ..."


The following errors are reported in the SWSE log files:
SBL-NET-01020: Internal: unknown hostname
SBL-SSM-00044: Virtual host is invalid.

This occurs even when lbconfig.txt contains IP addresses instead of hostnames.



Changes


Implementing Load Balancing triggered the problem.


Cause


There is an error in the eapps.cfg file created by the SWSE installation. This has been identified in unpublished
Bug:10534386 VirtualHostsFile refers to lbconfig.cfg instead of lbconfig.txt



Solution


Making the following change to SWSE_ROOT/bin/eapps.cfg resolves the issue:

[ConnMgmt]
…
VirtualHostsFile = $(SWSE_ROOT)/admin/lbconfig.txt


That is, change lbconfig.cfg to lbconfig.txt and make sure that the path contains / instead of \. 












Applies to:


Siebel Financial Services CRM - Version 8.1.1 SIA [21111] and later
Information in this document applies to any platform.



Symptoms


 To enable Siebel Native Load Balancing, following conditions must be met.





1) [ConnMgmt]  section in eapps.cfg


EnableVirtualHosts parameter is set to "TRUE".


VirtualHostsFile parameter points to the load balancing configuration file.





2) load balancing configuration file


It must be generated by "generate lbconfig" command in srvrmgr. File
name can be lbconfig.txt, lbconfig.cfg, or other name as long as it
matches to the path name specified by VirtualHostsFile parameter in
eapps.cfg file. It can be edited to remove unnecessary entries.





Even though all of the above conditions seem to be met, web clients
cannot see the login page and receive the error message "The server you
are trying to access is either busy or experiencing difficulties. Please
close the Web browser, open a new browser window, and try logging in
again. [hh:mm:ss]"





Also, the corresponding SWSE log shows following error messages to
indicate "VirtualServer" is not replaced with the actual Siebel Server
name.





SBL-SSM-0044: Virtual host is invalid


SBL-NET-01020: Internal: unknown hostname


[SWSE] Set Error Response (Session: Error: 10879185 Message: Login
failed attempting to connect to
siebel.TCPIP.None.None://VirtualServer/SIA81/ FINSObjMgr_jpn)



Cause


 After some review, the cause is found that there are some invalid
character in load balancing configuration file (lbconfig.txt) as below.





<lbconfig.txt>


・ｿ#This is the load balance configuration file generated by the Siebel srvrmgr "generate lbconfig" command.


#It contains two sections. Section one contains load balancing rules to be used by Siebel session manager.


#Section two is intended for 3rd party load balancers. Before modifying the content of this file please


#read the chapter on SWSE configuration in the Siebel Bookshelf.





#Section one -- Session Manager Rules:


VirtualServer=1:jw3s8111:2321; 3:jw3s8112:2321;








On the first line, there are some invalid characters before "#" sign.
Therefore this line is treated as the actual parameter line instead of a
comment, with invalid contents. Therefore the rest of settings are
ignored and "VirtualServer" in eapps.cfg is not replaced.





In this case, lbconfig.txt was edited to remove unnecessary server
entry. However, the editor used for this operation did not recognize
lbconfig.txt was UTF-8 encoded file. Therefore the first three
characters (Byte order mark or BOM that consists of hexadecimal 'ef bb
bf' in UTF-8 encoding) were converted to (invalid) characters.



Solution


 Once these invalid characters are removed from lbconfig.txt file,
"VirtualServer" in eapps.cfg file is replaced correctly so that web
clients can connect to either jw3s8111 or jw3s8112 in the round robin
fashion.














Applies to:


Siebel System Software - Version: 7.7.2 SIA [18325] to 8.1.1.3 SIA[21219] - Release: V7 to V8
Oracle Solaris on SPARC (64-bit)

Product Release: V7 (Enterprise)

Version: 7.5.3 [16157] Auto

Database: Oracle 9.2.0.6

Application Server OS: Sun Solaris 8

Database Server OS: Sun Solaris 9



This document was previously published as Siebel SR 38-2564725051.



***Checked for relevance on 06-Oct-2010***



Symptoms


Folllowing upgrade from 753 to 77 we have got our siebel servers back on
line but am having problems connecting with the web client. Have
attached web server logs, web config files, web server logs, eapps and
sia, cfg files.



Please advise soonest. thanks.


Cause


Incorrect lbconfig setting


Solution



For the benefits of other users:

Customer having login issue after upgraded Siebel application from 753
to 77. SWSE logs reported following error which indicated the cause of
the connection issue.



GenericLog    GenericError    1    0    2005-10-07
14:40:43    (smconn.cpp (395) err=1801020 sys=1300230) SBL-NET-01020:
Internal: unknown hostname



eapps.cfg showed EnableVirtualHosts set to True and component connect
string has VirtualServer configured where lbconfig.txt has the following
configured.



VirtualServer=2:1:chqs07005:2321;2:chqs07006:2321;

#Component Rules:

/gmitprdent/edealerObjMgr_enu/=chqs07006:2321;chqs07005:2321;gmitprdsrvr:2321;

/gmitprdent/eautoObjMgr_enu/=chqs07006:2321;chqs07005:2321;gmitprdsrvr:2321;

/gmitprdent/edealerObjMgr_fra/=chqs07006:2321;chqs07005:2321;gmitprdsrvr:2321;

/gmitprdent/eautoObjMgr_fra/=chqs07006:2321;chqs07005:2321;gmitprdsrvr:2321;

#Server Rules:

*/!1.*=chqs07005:2321;

*/!2.*=chqs07006:2321;



Resolution:



Verify and make sure that hostnames chqs07005, chqs07006 and gmitprdsrvr
are all DNS resolvable (using nslookup) to the correct IP addresses
from the web server and correct the component rules where hostname
gmitprdsrvr shall be removed as it is not in the VirtualServer entries.



Thank you,





תגובות

הוסף רשומת תגובה

פוסטים פופולריים מהבלוג הזה

Profile Attributes and Open UI

תמונה
Yes, Profile Attributes! As the ever attentive, up-to-date Siebel CRM expert that you are when you read this, you know that in Siebel Open UI (since version 15), it is no longer allowed/supported to  set  Profile Attributes from browser-side script. But  getting  them is not a problem, since the  GetProfileAttr  function works perfectly fine. Recently I found a few vanilla Profile Attributes that came quite handy in my work in Open UI JavaScript: Navigation Type : stores the navigation type such as "NAVIGATION_TAB" ActiveViewName : does what it says on the tin IsOpenUI : returns "1" when the application runs in Open UI Is SUI Theme : when "TRUE", the application theme is Synergy (aka SUI) Position:  returns the currently active position Primary Responsibility Name : guess what this one is… Profile Image : returns the URL of the user's profile image Org.Name : returns the name of the user's organization Here's a sample line of ...
המשך לקרוא

SBL-BPR-00191: The rowId of the active row of the primary buscomp '%1', '%2', does not match the Primary Id

Applies to: Product Release: V7 (Enterprise) Version: 7.5.3 [16157] ESN Database: Oracle 9.2.0.2 Application Server OS: Microsoft Windows 2000 Server SP 3 Database Server OS: Microsoft Windows 2000 Server SP 3 This document was previously published as Siebel SR 38-1386997031. Symptoms SBL-BPR-00191 We have a error with a workflow. This WF is excuted by policy when a particular activity is closed. The WF Business Object is 'Action'. Inside this WF, there is a subprocess that invokes a Business Service that creates a new activity. In a second subprocess, the region Id of this new activity is updated using the standar update method funcionality of Siebel workflow process. Error processing Siebel Operation for: Business Object 'Action' Business Component 'Action' Primary Id ''1-5NEI6' Operation 'Insert'(SBL-BPR-00100) -- The rowId of the active row of the primary buscomp 'Action', '1-4SNCV', does not match the Prima...
המשך לקרוא

SBL-SVC-00150

Applies to: Siebel CRM - Version: 7.5.3 [16157] and later   [Release: V7 and later ] z*OBSOLETE: Microsoft Windows 2000 Product Release: V7 (Enterprise) Version: 7.5.3 [16157] Database: IBM DB2/UDB 7.2 Application Server OS: Microsoft Windows 2000 Advanced Server SP 2 Database Server OS: IBM AIX 4.3.3 This document was previously published as Siebel SR 38-1153677971. Symptoms SBL-SVC-00150In callcenter (development environment) Group News administration > All News, when the ‘Status’ field of a news story is changed from ‘Submitted’ to ‘Completed’, the following error pops up. You cannot change the current field’s value from ‘Submitted’ to ‘Completed’. Rule validation failed: ‘[Total Approvers] = 0’ (SBL-SVC-00150) When the status field of a news story is changed from ‘Submitted’ to ‘Pending Approval’, the following error pops up. You cannot change the current field’s value from ‘Submitted’ to ‘Pending Approval’. R...
המשך לקרוא