SBL-EAI-04065: Target field '%1' does not exist.

Applies to:


Siebel System Software - Version: 7.5.3.15 SIA [16279] and later   [Release: V7 and later ]
z*OBSOLETE: Microsoft Windows 2000

Product Release: V7 (Enterprise)

Version: 7.5.3.15 [16279] NLD Fin Svcs

Database: Oracle 9.2.0.4

Application Server OS: Microsoft Windows 2000 Server SP 4

Database Server OS: Red Hat Linux 3.0



This document was previously published as Siebel SR 38-3469112021.

***Checked for relevance on 28-DEC-2010***


Symptoms


Due to changing requirements it was necessary to move some fields from one integration
component to another one.
Changes were made on the BC and IC levels (inactivating the old
fields, creating the new ones).


During testing the following errors were observed :
[1][0] Fout tijdens het uitvoeren van subproces YAR
Synchronous Inbound/Outbound in stap Send Outbound Message. (SBL-BPR-00183) (0x80eb)
[2][1]
Doelveld YAR Repayment Duration bestaat niet. (SBL-EAI-04065) (0x818b)
[3][2] Fout bij
oproepen van service EAI Data Transformation Engine, methode Execute in stap Convert Country
Codes Policy.(SBL-BPR-00162) (0x80d8)
[4] Objectmanagerfout: ([2] Fout bij oproepen van
service EAI Data Transformation Engine, methode Execute in stap Convert Country Codes
Policy.(SBL-BPR-00162) (0x80d8))
[5] Fout (null) bij oproepmethode "(null)" voor Business
Service "(null)"


(translated)

Target field Repayment Duration does not exist. (SBL-EAI-04065)



Cause


The field had been removed from the underlying Integration Component, but had also been marked Inactive in the Administration - Integration > Data Map Editor view. However, in order for the EAI Data Transformation Engine to load the map, it is required that all fields referenced (marked inactive or not) should exist in the Integration Component.


Solution




Please remove the field from the data map as well.


The Validate option in the Administration - Integration > Data Map Editor should highlight this discrepancy between the run-time client data, and the Integration Component defintion. However, it does not report this problem. Change request 12-1LGMFMO has therefore been logged to address this.

References


BUG:10530636 - VALIDATE BUTTON ON ADMIN - INTEGRATION > DATA MAP EDITOR DOES NOT FIND REMOVED INT COMP FIELDS











Applies to:


Siebel Connector for PeopleSoft Applications - Version: 7.5.3 [16157] and later   [Release: V7 and later ]
Siebel Connector for SAP R/3 - Version: 7.5.3 [16157] and later    [Release: V7 and later]
Siebel Connector for Oracle Applications - Version: 7.5.3 [16157] and later    [Release: V7 and later]
z*OBSOLETE: Microsoft Windows 2000

Product Release: V7 (Enterprise)

Version: 7.5.3 [16157]

Database: Oracle 9.2.0.2

Application Server OS: Microsoft Windows 2000 Server SP 2

Database Server OS: HP-UX 11.0



This document was previously published as Siebel SR 38-1216451791.

***Checked for relevance on 01-NOV-2010***


Symptoms


the following error was reported in the SAP Process Transaction log, for Workflow Process 'Product - Receive SAP 4x Material (4x IDOC) – DDTE’)', where the EAI Data Mapping Engine was being called :-



Das Zielfeld 'Dimension 1' ist nicht vorhanden.(SBL-EAI-04065)


(English translation)



Target field 'Dimension 1' does not exist.(SBL-EAI-04065)


The customer was able to provide a sample Siebel Message by temporarily amending the Workflow Process to write the message using the ‘EAI XML Write to File’ service. The error could then be re-created with a Workflow Process which read the saved message, and passed this as input to the EAI Data Mapping Engine service.

Cause


Further investigation showed the cause was the SRF not containing the expected Integration Component definitions,

Solution



Re-compiling the objects to the SRF file resolved this.




Regarding the method of transformation, both the decalrative Data Mapper, and eScript Data Mapping are valid approaches. However, using scripting does allow more flexibility, and is required for more complex transformations. See the bookshelf reference Siebel eBusiness Application Integration Volume IV > Data Mapping Using the Siebel Data Mapper > Siebel Data Mapper Overview for further information.




תגובות

הוסף רשומת תגובה

פוסטים פופולריים מהבלוג הזה

FINS Data Transfer Utilities

תמונה
The best thing while working on siebel is you are never short of options. Recently we had requirement of updating a Service request from contact. Finally we did that using "EAI Siebel Adapter" business service. However during that time i came across another business service "FINS Data Transfer Utilities" popularly known as DTU business service. As i was not having prior knowledge of it going by the rule of not learning swimming lessons while drowning i decided not to go for it. Lately i have tried to explore this service and trust me it can do wonders. Here is a sample example update of Service Request from contact. We need to follow below steps in order to understand strength of this business service. 1 - Navigate to Site Map. Go to Administration - Application -> Data Map Administration tab. Create a new Record with following options: Name: Service Request Test Source Business Object: Contact Destination Business Object: Service Request Here the source business
המשך לקרוא

SBL-BPR-00191: The rowId of the active row of the primary buscomp '%1', '%2', does not match the Primary Id

Applies to: Product Release: V7 (Enterprise) Version: 7.5.3 [16157] ESN Database: Oracle 9.2.0.2 Application Server OS: Microsoft Windows 2000 Server SP 3 Database Server OS: Microsoft Windows 2000 Server SP 3 This document was previously published as Siebel SR 38-1386997031. Symptoms SBL-BPR-00191 We have a error with a workflow. This WF is excuted by policy when a particular activity is closed. The WF Business Object is 'Action'. Inside this WF, there is a subprocess that invokes a Business Service that creates a new activity. In a second subprocess, the region Id of this new activity is updated using the standar update method funcionality of Siebel workflow process. Error processing Siebel Operation for: Business Object 'Action' Business Component 'Action' Primary Id ''1-5NEI6' Operation 'Insert'(SBL-BPR-00100) -- The rowId of the active row of the primary buscomp 'Action', '1-4SNCV', does not match the Prima
המשך לקרוא

Profile Attributes and Open UI

תמונה
Yes, Profile Attributes! As the ever attentive, up-to-date Siebel CRM expert that you are when you read this, you know that in Siebel Open UI (since version 15), it is no longer allowed/supported to  set  Profile Attributes from browser-side script. But  getting  them is not a problem, since the  GetProfileAttr  function works perfectly fine. Recently I found a few vanilla Profile Attributes that came quite handy in my work in Open UI JavaScript: Navigation Type : stores the navigation type such as "NAVIGATION_TAB" ActiveViewName : does what it says on the tin IsOpenUI : returns "1" when the application runs in Open UI Is SUI Theme : when "TRUE", the application theme is Synergy (aka SUI) Position:  returns the currently active position Primary Responsibility Name : guess what this one is… Profile Image : returns the URL of the user's profile image Org.Name : returns the name of the user's organization Here's a sample line of
המשך לקרוא